Operation; Preparation - Beko BKK 3060 KL User Manual

3

Operation

3.1 Preparation

1. Before using of the appliance for
first time, clean all parts which
come into contact with water
carefully (See 4.1).
2. Completely roll out the power
cord from the power cord
storage (8) on the bottom. Pass
the power cord through the slot
on the base (7).
3. Fill the kettle with water.
4. Set the kettle on its base (7).
Make sure that the kettle is
sitting in an upright position
and that it is sitting on the base
correctly and in a stable position.
5. Pour out the hot water and
rinse the kettle with water.
This will remove any remaining
manufacturing residues from the
inside of the kettle.
6. Clean kettle well before initial
use and discard water of first two
boiling cycles.
12 / 26 EN
3.2 Operation
1. Push the lid release button (3) on
the kettle to open the lid (2).
– The lid (2) opens automatically.
2. Fill the water tank with water.
Do not place the ket-
C
tle on the base (7)
while filling it with
water.
3. Close the lid (2) until it clicks into
place.
4. Place the water tank on the base
(7). Make sure that it is sitting in
an upright and stable position.
5. Insert the plug into the wall soc-
ket.
6. Press down On / Off switch (6).
– Power on indicator illuminates
and heating process begins.
Lid (2) should always
be closed during the
C
heating process; oth-
erwise the kettle will
not switch off auto-
matically.
Kettle / User Manual