2
Operation
2.1 Operation
C
Do not place the water tank (10)
on the base (8) while filling it with
water.
C
Never fill the water tank (10) above
the maximum level indicator (6) or
below the minimum level indicator.
Lid (3) should always be closed
C
during
otherwise the kettle will not switch
off automatically.
C
If you want to stop the heating
manually, push the On/Off switch
(7) upwards.
Do not open the lid
(3) as hot water could
A
splash out. Make sure
that no water splashes
onto the base (8).
C
If you want to continue the boiling
process, repeat the procedure from
1 to 10.
C
Let the kettle cool down between
each heating process.
Hints and Tips
• The kettle is equipped with a water filter (2)
which filters out limestone and other residues
when the water is being poured out.
• Use softened or filtered water to prevent lime
build-up.
Kettle / User Manual
the
boiling
process;
11 / EN