SUBWOOFER CONTROLS
Rear Panel
CS80SUB/230
Subwoofer-Level Control
Phase Switch
LFE Input
Line-Level Inputs
Power Indicator LED
Power Switch
Subwoofer Connections
If you have a Dolby
low-frequency-effects (LFE) or subwoofer output:
¡
PHASE
™
£
¢
∞
If your receiver/processor does not contain a Dolby Digital or DTS
processor but has a subwoofer output:
§
AC 220V-230V
50Hz-60Hz
220 Watts
NOTE: If your receiver/processor has only one sub out, you may use
either the L or R input.
Important!
Whenever changing cables, pulling plugs, etc., ALWAYS TURN OFF
ALL EQUIPMENT, including the subwoofer.
®
Digital or DTS
®
receiver/processor with a
RECEIVER/PROCESSOR
SUBWOOFER OR
LFE OUTPUT
(15')
4.5m
Subwoofer
cable included
RECEIVER/PROCESSOR
4.5m (15')
Subwoofer cable
included
7