LevelOne WBR-6805 User Manual page 21

Wireless Mode
SSID
Channel Width
Channel Number
Country
Broadcast SSID
Associated
Client
* Please click on the Apply Changes button or the Reset button at the bottom to save/reset the configurations.
1. Multiple APs
This is the window that pops up after clicking the
Note: This function only support in Router & AP mode, not support in
Client mode.
In the drop list, there are two types of wireless mode: "AP" and "Client".
You may select one type for your configuration.
Note: This fuction only support in AP mode.
Service set identifier (SSID) for the name of the wireless network. In
Client Mode, this SSID is used for setting Virtual AP's name.
Select 20MHz or 40MHz (40MHz only support in 11n mode) as the
wireless channel frequency.
Select a channel for the wireless network of this device.
It contains USA(FCC), Canada(IC), Europe(ETSI), Spain, France,
Japan(MKK) for your selection.
If you enable "Broadcast SSID", every wireless station located within the
coverage of this wireless router can discover this wireless router easily.
If you are building a public wireless network, enabling this feature is
recommended. Disabling "Broadcast SSID" can be more safe.
Click "Show Active Clients" button, then an "Active Wireless Client
Table" will pop up. You can see the status of all active wireless stations
that are connecting to the access point.
button.
21