Change The Call Settings; Set The Base Ringtone - BT 2000 Quick Setup And User Manual

38 Settings
The default setting for all call
settings is On.
If Auto answer is set to On you
can answer a call by lifting the
handset off the base. If it's set
to Off, you'll need to lift the
handset off the base and then
press .
If Auto end is set to On you
can end a call by placing the
handset back in the base.
If Auto end is set to Off,
you'll need to press
the call.
With Auto join calls set to On
you can automatically join
an existing call from another
registered handset without
being invited to join the call,
you can simply press
With First ring set to Off, an
incoming external call will be
displayed visually before the
handset(s) start to ring for the
second burst of ringing.
Choose from 5 base ringtones.
The default base ringtone is
Melody 1.
1. Select Menu, scroll
2. Sounds is displayed, press
3. Auto Answer is displayed, press
4. Press
to end
1. Select Menu, scroll
2. Sounds is displayed, press
to join.
3. Ringing is displayed, press
4. The current ringtone will be played at the base.
If you need some help, call us on 0800 145 6789* or go to www.bt.com/producthelp

Change the call settings

displayed and press
to display either Auto End Call, Auto join calls or
First Ring and then press
or to select On or Off then press
to save. Saved will be displayed and you will hear a
confirmation tone.
Base settings

Set the base ringtone

displayed and press
displayed, press
Press or to hear the different ringtones and
press to save your choice. Saved will be
displayed and you will hear a confirmation tone.
to Settings and press
until Call Settings is
.
or press
.
to Settings and press
until Base Settings is
.
. Ringtone is
.
.
.