Change The Call Settings; Set The Base Ringtone - BT BT2100 Quick Setup And User Manual

Change the call settings

1. Select Menu, scroll
2. Sounds is displayed, press
displayed and press
3. Auto Answer is displayed, press
display either Auto End Call, Auto join calls or
First Ring and then press
4. Press or to select On or Off then press
save. Saved will be displayed and you will hear a
confirmation tone.
Base settings

Set the base ringtone

1. Select Menu, scroll
2. Sounds is displayed, press
displayed and press
3. Ringing is displayed, press
displayed, press
4. The current ringtone will be played at the base.
Press or to hear the different ringtones
and press to save your choice. Saved will be
displayed and you will hear a confirmation tone.
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
to Settings and press
until Call Settings is
.
or press
.
to Settings and press
until Base Settings is
.
. Ringtone is
.
The default setting for all call
settings is On.
.
If Auto answer is set to On you
can answer a call by lifting the
handset off the base. If it's set
to Off, you'll need to lift the
to
handset off the base and then
press .
If Auto end is set to On you
can end a call by placing the
to
handset back in the base.
If Auto end is set to Off,
you'll need to press
the call and if the handset is
placed back in the base it will
switch to handsfree mode.
With Auto join calls set to On
you can automatically join
.
an existing call from another
registered handset without
being invited to join the call,
you can simply press
With First ring set to Off, an
incoming external call will be
displayed visually before the
handset(s) start to ring for the
second burst of ringing.
Choose from 5 base ringtones.
The default base ringtone is
Melody 1.
Settings 39
to end
to join.