INSTRUMENT AND CONTROL FUNCTIONS
1
1. Rider seat height position adjuster
4
3. Install the rider seat height position
adjuster so that the match mark is
aligned with the "H" mark as
shown.
1
2
1. Rider seat height position adjuster
2. "H" mark
3. Match mark
4. Insert the projection on the rear of
the rider seat into seat holder B as
shown.
1. Projection
2. Seat holder B (for high position)
TIP
3
Make sure that the rider seat is properly
secured before riding.
Windshield
If the original windshield is removed
and then reinstalled, be sure to install
the windshield screws in the lower
1
holes and tighten the screws to the
specified torque. WARNING! A loose
2
windshield could cause an accident.
Be sure to tighten the screws to the
specified torque.
1. Lower hole
4-24
[EWA15510]
Tightening torque:
Windshield screw:
0.5 Nm (0.05 m·kgf, 0.36 ft·lbf)
1
EAU49882
1