Adjusting The Shock Absorber Assembly - Yamaha XTZ12D(C) Owner's Manual

Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
ing knob and a rebound damping force
adjusting knob.
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Spring preload
To increase the spring preload and
thereby harden the suspension, turn
the adjusting knob in direction (a). To
decrease the spring preload and there-
by soften the suspension, turn the ad-
justing knob in direction (b).
TIP
Align the appropriate mark on the ad-
justing mechanism with the matching
edge.
INSTRUMENT AND CONTROL FUNCTIONS
EAU49690
1
(b)
(a)
ECA10101
1. Spring preload adjusting knob
2. Matching edge
Spring preload setting:
Minimum (soft):
6
Standard:
4
Maximum (hard):
1
Rebound damping force
To increase the rebound damping force
and thereby harden the rebound damp-
ing, turn the adjusting knob in direction
(a). To decrease the rebound damping
force and thereby soften the rebound
damping, turn the adjusting knob in di-
rection (b).
2
6
S O F T
5
4
3
2
H A R D
1
1. Rebound damping force adjusting knob
TIP
To obtain a precise adjustment, it is ad-
visable to check the actual total number
of clicks or turns of each damping force
adjusting mechanism. This adjustment
range may not exactly match the spec-
ifications listed due to small differences
in production.
4-27
(b)
(a)
1
Rebound damping setting:
Minimum (soft):
20 clicks in direction (b)*
Standard:
10 clicks in direction (b)*
Maximum (hard):
3 clicks in direction (b)*
* With the adjusting knob fully turned
in direction (a)
4