Advent ADV10PS2 Operation Manual page 19

3) Press the light gray ENTER button on the remote control and the following screen will appear:
p q
4) Use the light gray (up) or
turn the FM Modulator on.
FMM SELECT
1) Repeat steps 1 through 3 above and highlight FMM SELECT
q
2) Use the light gray (down) arrow on the remote control to highlight FMM SELECT and press the ENTER button, the following
screen will appear .
p q
3 ) Use the light gray (up)
in the area. Press the light gray ENTER button to select the highlighted frequency.
NOTE : The menu will time out after a short period, or press the SYSTEM MENU button to turn off the menu.
(down) arrow on the remote control to highlight FMM ON and press the light gray ENTER button to
FM M SELECT
88.1 M Hz
88.3 M Hz
88.5 M Hz
88.7 M Hz
88.9 M Hz
89.1 M Hz
89.3 M Hz
89.5 M Hz
t u
(down) (left) (right) buttons on the remote control to select a frequency not used by a radio station
89.7 M Hz
89.9 M Hz
90.1 M Hz
90.3 M Hz
90.5 M Hz
90.7 M Hz
90.9 M Hz
91.1 M Hz
19