Quinny moodd CV078 User Manual page 10

To Use
WARNING
To avoid serious injury:
• Use ONLY Maxi-Cosi Mico
Quinny Dreami™ Bassinet with adapters included
with this stroller.
• Please refer to the manufacturer's instructions
for the use of your infant car seat.
• ALWAYS install car seat facing to the rear of
the stroller.
• ALWAYS use the restraint system in the car
seat.
16
Install Maxi-Cosi Mico
Dreami Bassinet
TM
Push the parking brake pedal down. Remove the seat.
Insert the adapters into the frame hubs until you hear a "click" (Figure 16).
Each adapter is designed to fit into appropriate side. If adapter does not
fit, try other side.
Car seat and bassinet must be positioned so
that child faces the stroller handle
Lower car seat or bassinet into car seat adapters until both sides "click"
(Figure 16b).
Pull up on car seat or bassinet to ensure that it is locked into place
(Figure 16c).
To remove car seat, press both buttons on car seat while lifting car seat
2x
up (Figure 16d). To remove bassinet, press both buttons on bassinet
while lifting bassinet up (Figure 16d).
To remove car seat adapters, press release button and slide adapter off
the frame hubs (Figure 16e).
infant car seat and
®
Infant Car Seats or Quinny
®
(Figure 16a)
2x
16
16a
2x
2x
.
16d
2x
CAR SEAT
2x
BASSINET
8
16c
16b
CAR SEAT
CAR SEAT
BASSINET BASSINET
16e
2x
2x