Advertisement
Setting Up The System Programming Features:
Bank 1 Transmitter Channels
Start with the system disarmed, tun the ignition switch to the on position then:
1) Press and release the push button valet/program switch 3 times.
Siren Chirps once and or Lights flash one time indicating the transmitter program mode
successfully entered.
See Owners Manual for transmitter programming.
Turn the ignition switch off then on to access Bank 2 Keyless/Alarm feature selections.
1 short/1 long chirp when the key transitions off, followed by 1 short/1 long chirp when the
key is turned on indicates that you are in feature selection of bank 2.
Press the push-button switch:
1 time to access the first selection as shown below. Use the lock button of the transmitter to
change the feature selection or press the push-button to advance to the next selectable
feature.
Bank 2
Feature
1 Chirp/Flash 2 Chirp/Flash 3 Chirp/Flash 4 Chirp/Flash
1
st
Door L/UL
1 Sec.
3.5 Sec.
2
nd
Accy Lock
On
Off
rd
3
Accy Unlock
All Doors
Off
4
th
Passive Locks
Passive
Active
5
th
Passive/Active Arm Passive
Active
6
th
Siren/Horn
Both
Siren
7
th
Horn Chirp
10ms
16ms
8
th
Override Method
Custom Code Valet
9
th
Chp Del From TX On
Off
When finished setting the keyless/alarm selectable features, turn the ignition off then on to
advance to Bank 3, Remote Start Selectable Features.
No reaction when the key transitions off and 2 long Chirp when the key transitions on.
Press the push-button switch one time to access the first selection as shown below. Use the
lock button of the transmitter to change the feature selection or press the push-button to
advance to the next selectable feature.
Bank 3
Feature
1 Chirp/Flash
2 Chirp/Flash
1 RF Start Chirp
Off
2 Run Time
5 Min.
10 Min.
3 Park Lights
On Steady
Flash
4 Input Check
Voltage
Tach
5 Voltage Level
> 0.5V B4 Start < 0.5V B4 Start
6 Ign. 2 Select
Off With Crank
On With Crank
7 Diagnostics
Off
On
8 Crank Time
0.8Sec
1.0 Sec
9 Gas/Diesel
Gas
Diesel 10
10 Crank Averaging
Averaging
Preset Time
11 RS Shock
Shunt Til Clear
Shunt RS Cycle Shunt From Tx
12 Turbo Select
Off
3 Mins
13 Blk/Blue Aux O/P
Single Pulse
As D/L Pulse
14 Time Start
2 Hours
4 Hours
When this option is set to "Averaging",the
vehicle must be started manually 8 times before
attempting to remote start. Failure to follow
this procedure will cause the ignition to turn
on, but will not send out voltage on the starter
wire.
1 S.L, Dbl.U/L Dbl L, 1 S. UL
Horn
30ms
40ms
3 Chirp/Flash 4 Chirp/Flash 5 Chirp/Flash 6 Chirps/Flash
On
15Min.
20 Min.
Same As Accy
1.5 Sec
2.0 Sec
Diesel 15
Diesel 20
5 Mins
10 Mins
14
5 Chirp/Flash 6 Chirps/Flash
Default
Dbl L, Dbl UL 1S L/350ms UL
1 Sec.
Off
Off
Active
Active
Both
50ms
16ms
Valet
Off
Default
On
10 Min
Steady
Tach
> 0.5
On With Crank
Off
1.0
Gas
Shunt Til Clear
Off
Single
4 Hours
128-7853A
14 of 16
Averaging
Advertisement
