Intel; Intel ® Rapid Storage Technology Enterprise Option Rom Utility - Asus P9D-M Series User Manual

5.2

Intel

®
Option ROM Utility
The Intel ® Rapid Storage Technology enterprise Option ROM utility allows you to create RAID
0, RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives that are
connected to the Serial ATA connectors supported by the Southbridge.
Before you proceed, ensure that you have installed the Serial ATA hard disk drives, have
set the correct jumper settings of the motherboard, and have set the correct SATA mode in
the BIOS setup. You can refer to sections 5.1.2 Installing hard disk drives, 5.1.3 Setting
Jumpers, and 5.1.4 Setting the RAID mode in BIOS for more information.
To launch the Intel Rapid Storage Technology enterprise Option ROM utility:
®
1. Turn on the system.
2. During POST, press <Ctrl+I> to display the utility main menu.
You may have to press <Ctrl>+<I> more than once to enter the main menu.
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023
Copyright(C) 2003-12 Intel Corporation.
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes:
None defined.
Physical Disks:
ID Drive Model
0 ST3300656SS
1 ST3300656SS
2 ST3300656SS
3 ST3300656SS
[ ]-Select
The navigation keys at the bottom of the screen allow you to move through the menus
and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and may not
exactly match the items on your screen.
ASUS P9D-M Series
Rapid Storage Technology Enterprise
[ MAIN MENU
[ DISK/VOLUME
Serial #
HWAS0000991753TR
37VN00009846RAJ1
397600009846UEDY
GWC50000991756G6
[ESC]-Exit
All Rights Reserved.
]
3. Reset Disks to Non-RAID
4. Exit
INFORMATION]
Size Type/Status(Vol ID)
279.3GB Non-RAID Disk
279.3GB Non-RAID Disk
279.3GB Non-RAID Disk
279.3GB Non-RAID Disk
[ENTER]-Select Menu
5-5