1. Manuals
  2. Brands
  3. Nokia Manuals
  4. Cell Phone
  5. 6275
  6. Disassembly

Nokia 6275 Disassembly

Mobile terminals
Hide thumbs Also See for 6275:
Table of Contents

Advertisement

Quick Links

Download this manual
Nokia Customer Care
6275/6275i (RM-154)
Mobile Terminals
Disassembly
Issue 1 - September 2006
Company Confidential

Advertisement

Table of Contents
loading

Related Manuals for Nokia 6275

Summary of Contents for Nokia 6275

  • Page 1 Nokia Customer Care 6275/6275i (RM-154) Mobile Terminals Disassembly Issue 1 - September 2006 Company Confidential...

  • Page 2: Table Of Contents

    6275/6275i (RM-154) Disassembly Nokia Customer Care Contents Page Safety Information ............................3 ESD Protection ............................. 3 Disassembly Instructions ..........................4 1. Remove the Battery Cover ........................4 2. Remove the Antenna Cover ......................... 5 3. Remove the A-Cover and Keymat ...................... 5 5.

  • Page 3: Safety Information

    ESD protection. • ESD-protected spare part packages MUST NOT be opened/closed outside an EPA. For more detailed information about ESD protection and EPAs, contact your local Nokia Customer Care representative. Issue 1 - September 2006...

  • Page 4: Disassembly Instructions

    6275/6275i (RM-154) Disassembly Nokia Customer Care Disassembly Instructions Use the following steps to disassemble the mobile terminal. 1. Remove the Battery Cover Cover the windows with a protective plastic film. Press down on the B-cover while sliding it away from the body of the mobile terminal.

  • Page 5: Remove The Antenna Cover

    6275/6275i (RM-154) Nokia Customer Care Disassembly 2. Remove the Antenna Cover Carefully unlock the antenna cover clips on both sides. Work your way around the assembly while loosening the cover. Be careful of the header cap and retaining snaps along either side and at top. After the cover pops loose from the assembly, slide the antenna cover off.
  • Page 6 6275/6275i (RM-154) Disassembly Nokia Customer Care Press/hold your thumb against the keypad while maneuvering the removal tool. Lift the tool until the A-cover clips detach from the D-cover. After the A-cover prongs release from the D-cover, separate the A-cover from the D-cover.

  • Page 7: Remove The Ui Module

    6275/6275i (RM-154) Nokia Customer Care Disassembly 5. Remove the UI Module In the order shown, remove the 6-Torx retaining screws. Unlock the metal clip holding the LCD connector and lift it away from the assembly. Use the SS-93 tool to detach the flex connector.

  • Page 8: Remove The Pwb And Lcd Module

    6275/6275i (RM-154) Disassembly Nokia Customer Care Use the SS-93 tool to unlock the plastic snaps on both sides of the C-cover assembly. Lift up and remove the assembly. 6. Remove the PWB and LCD Module Lift the PWB up from the assembly.

  • Page 9: Remove The Ihf Assembly

    6275/6275i (RM-154) Nokia Customer Care Disassembly Carefully pry the LCD module from the assembly. Carefully slide the assembly into the alignment shown below. 7. Remove the IHF Assembly Pry the IHF assembly out. However, be careful not to bend or damage the spring contacts.

  • Page 10: Remove The Dc Jack, Microphone, And Battery Floor

    6275/6275i (RM-154) Disassembly Nokia Customer Care Use the top of the SS-93 tool to pry the earpiece out. Carefully release the clips of the D-cover. These clips are very delicate and can break easily. This enables you to release the flash module.

  • Page 11: Remove The Volume/Zoom Key And Camera Key

    6275/6275i (RM-154) Nokia Customer Care Disassembly Use the tweezers to remove the microphone. Unlock the metal latches of the battery floor. 9. Remove the Volume/Zoom Key and Camera Key Use the tweezers to release and remove the volume and zoom key.

  • Page 12: Remove The Camera Module

    6275/6275i (RM-154) Disassembly Nokia Customer Care Use the tweezers to release and remove the camera key. 10. Remove the Camera Module Use the soldering jig or at least the C-cover as support when replacing the camera module. Use the SS-45 camera removal tool to release the clips of the camera module.
  • Page 13 6275/6275i (RM-154) Nokia Customer Care Disassembly Vertically lift the camera module out of the assembly. The disassembly procedure is complete. Issue 1 - September 2006 Company Confidential Page 13...
  • Page 14 6275/6275i (RM-154) Disassembly Nokia Customer Care Page 14 Company Confidential Issue 1 - September 2006...

This manual is also suitable for:

6275iRm-154

Table of Contents