Nokia 5140 User Manual page 62

S e t t i n g s
1. Contact your network operator or service provider to check
availability, to subscribe to the (E)GPRS service, and to obtain
information on data transfer speed and pricing.
2. Save the (E)GPRS settings for each application that uses (E)
GPRS.
Note that when you have selected GPRS as a data bearer, the
phone uses EGPRS instead of GPRS if EGPRS is available in your
network. You cannot select between EGPRS and GPRS, but for
some applications you may be able to select either GPRS or
data (circuit-switched data, CSD).
GPRS connection
To define the settings for (E)GPRS connections, press Menu, and
select Settings
• To set the phone to automatically register to an (E)GPRS
network when you switch on the phone, select
When you start an application using (E)GPRS, the connection
between the phone and the network is established. When
you exit the application, the (E)GPRS connection ends, but
your phone is still registered to the (E)GPRS network. Note
that the indicator for GPRS and EGPRS is the same.
• To set the phone to register to an (E)GPRS network and
establish an (E)GPRS connection when an application using
(E)GPRS requires it,
connection will close when you exit the application.
Note that the phone supports three simultaneous (E)GPRS
connections. For example, you can browse XHTML pages, receive
multimedia messages, and have an ongoing PC dial-up
connection at the same time.
GPRS modem settings
You can connect the phone with an infrared or a data cable
connection to a compatible PC, and use the phone as a modem
to enable (E)GPRS connections from the PC.
→
Connectivity
selectWhen
→ →
GPRS GPRS
needed. The (E)GPRS
62
GSM
connection.
Always online.