Reduction/Enlargement/Zoom; Automatic Ratio Selection - Sharp AR-M257 Operation Manual

REDUCTION/ENLARGEMENT/ZOOM

There are three ways to enlarge and reduce copies:
● Automatic ratio selection according to the paper size ........................... AUTOMATIC RATIO SELECTION (below)
● Specifying a ratio with the reduce key, enlarge key, or zoom key ..................MANUAL RATIO SELECTION (p.31)
● Separately selecting vertical and horizontal ratios ........................................................... XY ZOOM copying (p.32)
Ratios that can be selected vary depending on the following conditions:
Original position
Document glass
RSPF

AUTOMATIC RATIO SELECTION

The ratio is automatically selected based on the original size and paper size.
1
Place the original(s). (p.22, p.23)
The original size appears in the touch panel.
• If the original size does not appear in the
Note
touch panel, specify the original size
manually. (p.47)
• Automatic ratio selection is not possible if
the original or paper is a non-standard
size.
2
Touch the [PAPER SELECT] key and
then select the desired paper size.
8½x11 PLAIN
8½x14 RECYCLED
If paper of the desired size is not loaded in
Note
any of the trays, load paper of the required
size in a paper tray or in the bypass tray.
(p.19)
3
Touch the [AUTO IMAGE] key.
AUTO
PAPER
1
4
AUTO
IMAGE
COPY
30
The selected key is
highlighted and the paper
selection screen closes.
A suitable ratio is
selected based on the
original size and selected
1
paper size. (The ratio
appears in the touch
panel.)
Selectable ratios
25 to 400%
50 to 200%
• When automatic ratio selection is
Note
selected, the [AUTO IMAGE] key is
highlighted in the main screen.
• If the original and paper are in different
orientations, the image is automatically
rotated to match the paper orientation (for
paper sizes 8-1/2" x 11" (A4) or less).
• Rotation of the image can be disabled in
the key operator programs. (See the "Key
operator's guide".)
• If "IMAGE IS LARGER THAN THE COPY
PAPER." appears in the touch panel, part
of the image will be cut off in the copy.
4
Select the number of copies and any
other desired settings, and then press
the [START] key (
ACC.#-C
To cancel automatic ratio selection, touch
Note
the [AUTO IMAGE] key. Automatic ratio
selection also turns off automatically when
the enlargement key, the reduction key, or a
[ZOOM] key
the ratio to be selected.
).
( / )
is touched to allow