Introduction - GE Choice Alert User Manual

Introduction

The Motion Sensor is designed to be used indoors or
out. When mounted properly it can monitor large or
open areas such as entrances, living rooms, family
rooms, driveways, backyards, walkways, workshops,
etc. When the Sensor detects motion, it will transmit
a signal to the Control Center. The Zone selection and
settings on the Control Center determine if an alarm or
an alert sounds.
Parts Check List
Identify all the parts before proceeding.
Motion Sensor
with mounting bracket
2 - Screws
2 - Plastic anchors
Ball-head joint
5