Selecting A Source - Meridian DSP420 User Manual

In-wall loudspeaker system

Hide thumbs Also See for DSP420:

Table of Contents

Enlarged version

Using the DSP420

Selecting a source

loudspeakers

When not playing, the digital loudspeakers should

be left in the standby state. This ensures that the

components of the loudspeakers operate at maximum

efficiency from the moment you start.

To select a source

•

Press the appropriate source key on the remote; eg

DVD.

This will bring the digital loudspeakers out of standby. If

there is a signal to the loudspeakers the green indicator

on each loudspeaker will be illuminated.

To switch to standby

•

Press Off on the remote.

The loudspeakers will switch to standby and the green

indicator on each loudspeaker will go off.

Table of Contents