Meridian Configuration program
repeatedly fails to talk to the
loudspeaker
•
Check that you have selected the correct COMMS
port on your PC.
•
Check that no other program currently running is
using the COMMS port.
•
Check that it is connected correctly.
•
Turn off the DSP420 for a few seconds and turn
back on, then retry.
•
Quit from all other programs and retry.
•
Reboot the computer and retry.
•
Ensure you are using the serial lead supplied with the
product, or a null modem cable.
•
If you are using a notebook computer, ensure that
it is connected to its power supply and not powered
from battery.
•
If you are using a notebook computer try turning off
the screensaver or power management software.
17
Troubleshooting