Adjusting The Balance Or Phase - Meridian DSP420 User Manual

In-wall loudspeaker system

Hide thumbs Also See for DSP420:

Table of Contents

Enlarged version

Using the DSP420

Adjusting the balance or phase

loudspeakers

The balance control of the DSP420 In-Wall

Loudspeaker System uses digital signal processing

to compensate for an off-centre listening position by

delaying and diminishing the sound in one loudspeaker,

thus effectively shifting the loudspeaker's image back.

To change the balance

•

Press < or > on the remote.

•

There are 20 settings in each direction.

To reset the balance to the centre

•

Press V on the remote.

Note: Because the use of the balance control

processes the digital signal, you may hear a slight

clicking as the balance is adjusted.

To change the phase

•

Press A on the remote.

The phase function controls the absolute phase of

the digital conversion. It can be used to compensate

for signals that are out of phase, giving an unnatural-

sounding bass.

Table of Contents