Led Indicators - Telstra MF65 User Manual

Pre-paid 3g wi-fi
Table of Contents

Advertisement

POWER UP YOUR WI-FI HOTSPOT
Press and hold the Power key for 3-4 seconds until the lights flash.
The Wi-Fi hotspot will start up in a few seconds. Check the condition of
your Wi-Fi hotspot as shown by the LED indicators.

LED INDICATORS

Flashing
Solid
Solid
Flashing
Solid
Flashing
Off
Solid
Solid
Flashing
CONNECT DEVICES BY WI-FI
Your Prepaid Wi-Fi hotspot can connect up to five devices via Wi-Fi
providing internet access for all your devices on the go.
• On the devices you wish to connect make sure Wi-Fi is switched on, then
search for Wi-Fi devices.
• The Wi-Fi router will show up as TPPWF_xxxxxx, click on this device to
connect.
• Consult your security card and enter the default security key which is
case sensitive. Any letters entered must be in upper case (capitals).
Telstra MF65 User Manual v1.0
Battery is discharged, < 12 %
Battery is low, < 23 %
Battery is OK, >23 %
Battery is charging
Wi-Fi is on
WPS is enabled, available for 2 minutes
Wi-Fi is off
Not registered on the network
Check you SIM status using the web
interface. No USIM, PIN, PUK or Network
locked USIM will result in this status.
Network is registered
Network data in use (Connected)
Page 4 of 30

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents