Precautions And Safety Information - Telstra MF65 User Manual

Problem
The battery goes
flat even though I
am connected to
the charger

PRECAUTIONS AND SAFETY INFORMATION

• Some electronic devices are susceptible to electromagnetic interference.
The Wi-Fi hotspot is a transmitting device and may cause interference to
sensitive electronic equipment such as audio systems, vehicle systems
and medical equipment. Please consult the manufacturer of the other
device before using the device.
• Operating of laptop or desktop PCs with the device may interfere with
medical devices like hearing aids and pacemakers. Please keep the
device more than 20 centimetres away from such medical devices. Turn
the device off if necessary. Consult a physician or the manufacturer of
the medical device before using near such devices.
• Be aware of regulations when using the device at places such as oil
refineries or chemical factories, where there are explosive gases or
explosive products being processed. Turn off your device as instructed.
• Don't touch the antenna area unnecessarily whilst connected. This can
affect your device performance and reduce the signal quality.
• Store the device out of the reach of children. The device may cause
injury or get damaged.
• The device contains sensitive electronic circuitry. Do not expose the
device to any liquids, high temperatures or shock.
• Only use original accessories or accessories that are authorised by the
manufacturer. Using unauthorised accessories may affect your device's
performance or damage your device.
• Avoid using the device in areas that emit electromagnetic waves or in
enclosed metallic structures eg lifts.
• The device is not waterproof. Please keep it dry and store it in a cool, dry
place.
• Don't use the device immediately after a sudden temperature change eg
from an air conditioned environment to high temperature and humidity
Telstra MF65 User Manual v1.0
Possible Causes
The internal device
temperature exceeds
45C so battery charging
is shut down for safety
reasons.
Suggested Solution
Switch off the device and
allow it to cool down. Operate
the device in a cooler
environment.
Page 28 of 30