Periodic Maintenance - Foley United 388 Assembly And Service Manual

MAINTENANCE

PERIODIC MAINTENANCE

1. Wipe and re-oil with a spray lubricant (do not use a teflon
based lubricant) lead screws once a month or every 40
hours of operation.
2. Wipe and re-oil with never-seez horizontal and vertical
cross slide shafts on mower support bar once a month or
every 40 hours of operation.
3. Lubricate the traverse rails with a spray lubricant (do not
use a teflon based lubricant) and wipe off the excess once
a month or every 40 hours.
4. Check Gib plate adjustment in the grinder carriage base
monthly or every 40 hours. See Page 9.
5. Check ALL Fasteners once every 3 months or 100 hours..
6. Clean dust bag when 1/2 full - approximately every 3
months or 100 hours.
7. Check the belt every 3 months or 100 hours. Check the
tension and look for cracks. See Page 9.
8. Wipe and grease carriage dovetail with lithium grease
every six months or every 200 hours of operation.
9. Rail Alignment - Check every 6 months or every 200
hours. See Page 9.
10. Rotate traverse shafts once a year or every 300 hours of
operation. See Page 9.
8