Table of Contents
Advertisement
INSTALLATION (Continued)
INSTALL REEL ELEVATOR
Bolt the left and right end frames to the top and bottom mounting
brackets already attached to the end panels using four 3/8-16 x
3/4" hex head cap screws (#14), two flatwashers over the top
bracket slots (#19), four lock washers (#21) and four nuts (#16).
The mounting bracket might have to be loosened and adjusted to
line up with the end frames. Bolt the end frame with the decal on
the winch end (right end of unit as viewed from the operator's
position) See FIG. 6. Bolt gussets loosely to the overhead channel,
which is installed with the pulleys on top, using eight 3/8-16 x 3/4"
long hex head screws (#14), eight lock washers (#21) and eight
nuts (#16). Lift overhead channel into position (Note the position
of the bracket in FIG. 6) and bolt to end frames using eight 3/8-16
x 3/4" long hex head screws (#14), lock washers (#21) and nuts
(#16). Align and securely tighten all nuts.
Attach the winch to the right side of unit as viewed from the
operator's position with the crank handle facing to the rear. In-
stall two 3/8-16 x 3/4" long hex head cap screws (#14) and one
flatwasher (#19), two lock washers (#21) and two nuts (#16). The
flatwasher goes over the winch housing slot. Assemble the winch
according to the instructions provided in the manual packet.
Thread the cable through the top middle hole in the channel
and over both pulleys. Attach the cable to the winch following
the procedure described in the winch instructions.
The cable is reeled up by rotating handle in a clockwise direction,
as it is reeled up it makes a clicking sound. The spring loaded
handle actuates a brake when handle is released.
Place spreader bar with chains and hooks onto cable hook (which
has safety latch feature built in). See FIG. 7.
Read separate directions on winch
operation and maintenance that is
included in the manual packet.
Do not overload the winch capacity.
Winch capacity is a maximum of
400 lbs. (180 kg)
5
5
FIG. 6
FIG. 7
Hide quick links:
Advertisement
Table of Contents
