Custom Size Paper - Xerox Phaser 6200 Features Manual

Custom size paper

In addition to the wide variety of standard paper sizes available for this printer, you can use custom size
paper in the Multi-Purpose Tray.
X dimension
Y dimension
To print on custom size paper:
1.
Open the Multi-Purpose Tray. For more information, see the Trays section of the Trays and Paper
Guide on the Interactive Documentation CD-ROM.
2.
Insert the custom size paper and adjust the guides to match the size of the paper. Place the side to
be printed facedown with the top of the page entering the printer first.
1
2
3.
When the front panel prompts you to confirm the type and size of paper:
a.
Scroll to
Change
b.
Scroll to the correct paper type and press the OK key to save your selection.
c.
For the paper size, scroll to
d.
Select
Set Custom X
e. Press the Down Arrow or Up Arrow key to scroll to the desired value for X (labeled 2 in the
illustration in Step 2) and then press the OK key.
f.
Scroll to
Set Custom Y
g. Press the Down Arrow or Up Arrow key to scroll to the desired value for Y (labeled 1 in the
illustration in Step 2) and then press the OK key.
4.
Select the custom size in the printer driver.
Phaser® 6200 Color Laser Printer
Size Range
89 mm - 216 mm
3.5 in. - 8.5 in.
140 mm - 356 mm
5.5 in. - 14 in.
by pressing the Down Arrow key and press the OK key.
and press the OK key.
Custom
by pressing the OK key.
and press the OK key.
Driver Features
6200-57
15