Programme options
Adjust Sensor wash
You can adjust the Sensor wash
programme so that it will remove
stubborn soiling in a lightly soiled load.
Switch the dishwasher off with the
button, if it is switched on.
Press the Start button in and whilst
holding it in switch the dishwasher
on using the On button
Keep the Start button pressed in for
at least four seconds until the Start
indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
52
Press the button 5 times.
The indicator will flash rapidly 5
times at intervals.
The flashing sequence in the display
indicates whether Adjust sensor wash
is activated or not.
– : "Adjust sensor wash" activated
– : "Adjust sensor wash" switched
off
Press the Start button to change the
setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.