Miele G 6100 Operating Instructions Manual page 13

Correct installation
 The dishwasher must be installed and connected in compliance
with the installation diagram supplied.
 Take care, both before and during installation of the
dishwasher, not to cut yourself on the metal parts. Danger of
injury. Wear protective gloves.
 The dishwasher must be correctly aligned to ensure problem-free
operation.
 In order to ensure stability, built-under and integrated
dishwashers must only be installed under a continuous worktop
which is secured to adjacent cabinetry.
 If you want to convert your freestanding dishwasher to a built-
under ("U") model, you will need to order the appropriate conversion
kit. If you remove the existing plinth, you must replace it with a U-
model plinth. This is necessary to avoid the risk of injury caused by
protruding metal parts.
 The door springs must be adjusted equally on both sides. They
are correctly adjusted when the door remains stationary when left
open at 45°. It is important that the door is held in place by the
springs and cannot fall open.
The appliance may only be used with correctly adjusted door
springs.
Warning and Safety instructions
13