Add Salt Reminder - Miele G 6100 Operating Instructions Manual

Before using for the first time

Add salt reminder

 Fill the salt reservoir with dishwasher
salt when the salt indicator light
comes on. (If it comes on during a
programme, wait until the end of the
programme).

Risk of corrosion.
Immediately after filling the salt
reservoir, run the Quick wash
programme with the Short
programme option selected and
without any crockery in the
dishwasher to remove any traces of
salt from the cabinet.
After the salt reservoir has been filled,
the refill indicator may still be lit up if
the salt concentration has not yet
reached the correct level. It will go out
when the correct concentration is
reached.
The refill reminder will be switched off if
you have programmed the dishwasher
for a water hardness below 0.9 mmol/l
(5°d - German scale).
24
If you only ever use multi-function
combination products in your
dishwasher, you can switch both refill
reminders for salt and rinse aid off if
you wish (see "Programme options -
Refill reminders").
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add salt
and rinse aid and to switch the
reminders back on.