Table of Contents
Advertisement
3. ELECTRICAL ADJUSTMENT
3-1. Table for Servicing Tools
Ref. No.
Name
J-1
Color viewer 5,100 K
Siemens star chart
J-2
J-3
Calibration software
Chart for color adjustment
J-4
Extension cord
J-5
Note: J-1 color viewer is 100 - 110 VAC only.
J-1
J-3
J-5
3-2. Equipment
1. Oscilloscope
2. Digital voltmeter
3. AC adaptor
4. IBM R -compatible PC
5. DC regulated power supply
3-3. Adjustment Items and Order
1. IC501 Oscillation Frequency Adjustment
2. 5.0 V (D) Voltage Adjustment
3. 3.3 V (D) A Voltage Adjustment
4. 3.4 V (D) B Voltage Adjustment
Part code
VJ8-0007
VJ8-0175
VJ8-0155
VJ8-0164
J-2
J-4
5. 12.4 V (L) Voltage Adjustment 1
6. 12.4 V (L) Voltage Adjustment 2
7. AWB Adjustment
8. Lens Adjustment
9. CCD Defect Detect Adjustment
10. LCD Panel Adjustment
10-1. LCD H AFC Adjustment
10-2. LCD RGB Offset Adjustment
10-3. LCD Gain Adjustment
10-4. LCD Blue Brightness Adjustment
10-5. LCD Red Brightness Adjustment
Note: If the lens, CCD and board in item 7-9, it is necessary
to adjust again. Adjustments other than these should
be carried out in sequence. For 9, carry out adjustment
after sufficient charging has taken place.
3-4. Setup
1. System requirements
Windows 98 or Me
IBM R -compatible PC with Pentium processor
CD-ROM drive
3.5-inch high-density diskette drive
Serial port with standard RS-232C interface or USB port
8 MB RAM
Hard disk drive with at least 15 MB available
VGA or SVGA monitor with at least 256-color display
2. Installing calibration software
1. Insert the calibration software installation diskette into your
diskette drive.
2. Open the explorer.
3. Copy the DSC Cal folder on the floppy disk in the FD drive
to a folder on the hard disk.
3. Installing USB drive
Install the USB drive with camera or connection kit for PC.
4. Color Viewer
Turn on the switch and wait for 30 minutes for aging to take
place before using Color Pure.
5. Computer screen during adjustment
Calibration
Upload
AWB
Firmware
Focus
Image
UV Matrix
Cal Mode
Initialize
OK
EVF
Cal Data
LCD Type
OK
USB strage
Get
VID
PID
Set
– 16 –
LCD
R Bright
B Bright
VCOMDC
RGB Offset
Gain
VCOMPP
Tint
Phase
H AFC
Test
Setting
Language
Set
Serial
Set
Video Mode
Set
Rev.
Set
Advertisement
Table of Contents
