Adjusting The Headlight Beams; Fittings And Fasteners; Battery - Yamaha PZ50RTZ Owner's Manual

1. Do not touch the glass part of the bulb.
Bulb type:
Halogen bulb
7. Install the bulb holder cover, and then
connect the headlight coupler.
8. Install the top cover (PZ50RT / PZ50GT /
PZ50MT) or close the shroud (PZ50VT).
ESU12280

Adjusting the headlight beams

Turn the headlight beam adjusting screws in
or out to adjust the headlight beams. The
headlight beams move as follows depending
on the turning direction of the headlight beam
adjusting screws.
Direction (a): Down and to the left
G
Direction (b): Up and to the right
G
Direction (c): Down and to the right
G
Direction (d): Up and to the left
G
1. Headlight beam adjusting screw
Periodic maintenance and adjustment
ESU12290

Fittings and fasteners

Check the tightness of the fittings and fasten-
ers.
Tighten in proper sequence and torque if nec-
essary.
ESU12303

Battery

This model is equipped with a VRLA (Valve
Regulated Lead Acid) battery. There is no
need to check the electrolyte or to add distilled
water. However, the battery lead connections
need to be checked and, if necessary, tight-
ened.
EWS00540
WARNING
Battery electrolyte is poisonous and dan-
gerous. It contains sulfuric acid and can
cause severe burns. Avoid contact with
skin, eyes, or clothing.
ANTIDOTE:
EXTERNAL: Flush with water.
G
INTERNAL: Drink large quantities of wa-
G
ter or milk. Follow with milk of magne-
sia, beaten egg, or vegetable oil. Call
physician immediately.
EYES: Flush with water for 15 minutes
G
and get prompt medical attention.
Batteries produce explosive gases. Keep
sparks, flame, cigarettes, etc. away. Venti-
late when charging or using in an en-
closed space. Always shield your eyes
when working near batteries.
KEEP OUT OF THE REACH OF CHILDREN.
Charge or have a Yamaha dealer charge the
battery as soon as possible if it seems to have
discharged. Keep in mind that the battery
tends to discharge more quickly if the snow-
mobile is equipped with electrical accesso-
ries.
73