Tail/Brake Light; Replacing A Turn Signal Light Bulb - Yamaha YW125Z Owner's Manual

Turn signal light bulb, replacing<IXE>

Tail/brake light

1. Tail/brake light
If the tail/brake light does not come on,
have a Yamaha dealer check its electri-
cal circuit or replace the bulb.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU43040
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
1
by removing the screw.
1
1. Turn signal light Bulb
EAU24204
1. Turn signal light Bulb
2. Remove the burnt-out bulb by push-
3. Insert a new bulb into the socket,
4. Install the lens by installing the
6-28 6-65
1
ing it in and turning it counterclock-
wise.
push it in, and then turn it clock-
wise until it stops.
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11191]
EAU1722A
1
2
3
4
5
6
7
8
9