Removing And Installing Panels - Yamaha YW125Z Owner's Manual

Panel, removing and installing<IXE>
Removing and installing
panels
The panels shown need to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time a panel needs to
be removed and installed.
2
1. Panel A
2. Panel B
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU18771
Panel A
To remove the panel
Remove the screw, and then pull out-
ward on the areas shown.
1
1. Panel A
2. Screw
To install the panel
Place the panel in the original position,
and then install the screw.
EAU19272
Panel B
To remove the panel
1. Remove panel A. (See page 6-8.)
2. Remove the screws and the quick
2
1
1. Panel B
2. Screw
3. Quick fastener screw
To install the panel
1. Place the panel in the original posi-
2. Install panel A.
6-45 6-8
fastener screws, and then take the
panel off.
3
tion, and then install the screws and
the quick fastener screws.
EAU1722A
EAUT2532
1
2
3
3
1
4
2
5
6
7
8
9