Changing The Brake Fluid; Checking And Lubricating The Cables - Yamaha YW125Z Owner's Manual

Cables, checking and lubricating<IXE>
PERIODIC MAINTENANCE AND ADJUSTMENT
mal for the brake fluid level to
gradually go down. However, if the
brake fluid level goes down sud-
denly, have a Yamaha dealer check
1
the cause.
2
3
4
5
6
7
8
9

Changing the brake fluid

Have a Yamaha dealer change the brake
fluid at the intervals specified in the TIP
after the periodic maintenance and lu-
brication chart. In addition, have the oil
seals of the brake master cylinder and
caliper as well as the brake hose re-
placed at the intervals listed below or
whenever they are damaged or leaking.
8 Oil seals: Replace every two years.
8 Brake hose: Replace every four
years.
6-58 6-21
EAU22721
Checking and lubricating the
cables
The operation of all control cables and
the condition of the cables should be
checked before each ride, and the
cables and cable ends should be lubri-
cated if necessary. If a cable is dam-
aged or does not move smoothly, have
a Yamaha dealer check or replace it.
WARNING! Damage to the outer hous-
ing of cables may result in internal
rusting and cause interference with
cable movement. Replace damaged
cables as soon as possible to prevent
unsafe conditions.
Recommended lubricant:
Yamaha Chain and Cable Lube or
engine oil
EAU1722A
EAU23093
[EWA10711]