Yamaha YW125Z Owner's Manual page 48

PERIODIC MAINTENANCE AND ADJUSTMENT
1
2
1
3
1. Oil filler cap
4
4. Install the engine oil drain bolt, and
then tighten it to the specified
5
torque.
6
7
8
9
1
1. Engine oil drain bolt
Tightening torque:
Engine oil drain bolt:
20 Nm (2.0 m • kgf, 14.5 ft • lbf)
5. Refill with the specified amount of
the recommended engine oil, and
then install and tighten the oil filler
cap.
Recommended engine oil:
See page 8-1.
Oil change quantity:
0.85 L (0.90 US qt, 0.75 Imp.qt)
NOTICE
● ● ● ● ●
Do not use oils with a diesel
specification of "CD" or oils of a
higher quality than specified. In
addition, do not use oils labeled
"ENERGY CONSERVING II" or
higher.
● ● ● ● ●
Be sure no foreign material en-
ters the crankcase.
6. Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking,
6-48 6-11
immediately turn the engine off and
check for the cause.
7. Turn the engine off, and then check
the oil level and correct it if neces-
sary.
ECA11670
EAU1722A