28.1 PPPoE Intermediate Agent Overview
This chapter describes how the Switch gives a PPPoE termination server additional information that
the server can use to identify and authenticate a PPPoE client.
A PPPoE Intermediate Agent (PPPoE IA) is deployed between a PPPoE server and PPPoE clients. It
helps the PPPoE server identify and authenticate clients by adding subscriber line specific
information to PPPoE discovery packets from clients on a per-port or per-port-per-VLAN basis
before forwarding them to the PPPoE server.
PPPoE Intermediate Agent (PPPoE IA) Overview
Figure 154
PPPoE Client
28.1.1 What You Can Do
• Use the PPPoE screen
• Use the Intermediate Agent screen
Intermediate Agent on the Switch.
• Use the PPPoE IA Per-Port screen
configure PPPoE intermediate agent sub-options on a per-port basis.
• Use the PPPoE IA Per-Port Per-VLAN screen
IA settings that apply to a specific VLAN on a port.
• Use the PPPoE IA for VLAN
Agent on a VLAN.
28.1.2 What You Need to Know
Read on for concepts on ARP that can help you configure the screen in this chapter.
GS1920 Series User's Guide
C
HAPTER
PPPoE IA
(Section 28.2 on page
219) to display the main PPPoE screen.
(Section 28.3 on page
(Section 28.3.1 on page
(Section 28.3.2 on page
(Section 28.3.3 on page
PPPoE
PPPoE Server
219) to enable the PPPoE
220) to set the port state and
222) to configure PPPoE
223) to enable the PPPoE Intermediate
2 8
216