Anchor WINGMAN 9000 Owner's Manual

Intercom adaptor

Advertisement

troubLeSHootIng?

INTeRFeReNCe IN PROLINK HeADSeTS?
Switch your belt pack settings to a different ProLink user group A or B.
BACKGROUND NOISe TRANSMITTING ACROSS SYSTeM?
Reduce the headset microphone sensitivity level. Adjust the ProLink mic sensitivity blue knob on the belt pack.
TRANSMISSION IS WeAK?
Your rechargeable batteries may be running low. If batteries are weak, the Green LeD will flash. Your belt pack
needs to be recharged. If you need to keep working, you can use disposable alkaline batteries.
PROPeR INTeRCOM eTIQUeTTe
WingMAN is an interface station that allows full duplex communication between ProLink belt packs and unbal-
anced party-line intercom systems. Use proper intercom etiquette – wait to break into the conversation network
until the other system users have stopped speaking.

wIngman tecHnIcaL SpecIFIcatIonS

Range (line of sight)
US: 200' - 250'
FCC License
Not Required
Selectable Wireless Groups
2
Selectable Wired Channels
2
Frequency
US: 902 – 928 MHz
Frequency Settings
4 per Group
Anchor Audio, Inc.
Portable
Sound
Interface Connector
3-pin female XLR
Antenna
1/2 wave length dipole
Antenna Length
4"
Dimensions
8.5 x 4.5 x 1.7 in / 21.6 x 11.4 x
4.32 cm
Weight
2.4lbs / 1.1kg
FCC ID: J8ZWM-9000
(Specifications subject to change without notice)
Systems
wIngmAn 9000
Intercom adaptor
OWNER'S MANUAL
GeTTING STARTeD ........................................................................................................................................................... 2
WHAT IS WINGMAN? ....................................................................................................................................................... 3

ANTeNNA PLACeMeNT ..................................................................................................................................................... 3

WIReLeSS TeLeX (BTR-700) USeRS ................................................................................................................................... 3
BASIC SYSTeM OPeRATION ............................................................................................................................................... 4
TROUBLeSHOOTING ......................................................................................................................................................... 8
WINGMAN TeCHNICAL SPeCIFICATIONS ............................................................................................................................ 8
100-0201-000/A - 5/10
contentS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WINGMAN 9000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Anchor WINGMAN 9000

  • Page 1: Troubleshooting

    WingMAN is an interface station that allows full duplex communication between ProLink belt packs and unbal- anced party-line intercom systems. Use proper intercom etiquette – wait to break into the conversation network until the other system users have stopped speaking. wIngmAn 9000 Intercom adaptor OWNER’S MANUAL...
  • Page 2: Getting Started

    Anchor employees gettIng Started Please check your new unit carefully for any damage which may have occurred during shipment. each Anchor prod- uct is carefully inspected at the factory and packed in specially designed boxes for safe transport.
  • Page 3 noteS wHat IS wIngman? WingMAN is an interface station that allows full duplex communication between ProLink belt packs and unbalanced party-line intercom systems. The ProLink includes a transceiver that operates in a FSK format which is compatible with ProLink belt packs. An integrated interface circuit makes it possible to easily interface the transceiver with party-line intercom systems.
  • Page 4: Pin Configuration

    Select Wired Channel (A or B) to be used according to the pin de- WIReD SYSTeM INTeRFACe scription above (also shown on pack panel) . The Wired Channel 3-pin XLR jack – connect to wired intercom system Switch matches the Anchor Audio PortaCOM belt pack channels.

This manual is also suitable for:

Wm-9000

Table of Contents