Switch Housing - Hunter Ceiling fan Instructions Manual

Switch Housing

www.HunterFan.com
1.888.830.1326
Feed the wire plug through the center Insert the third screw, found in
Screw two housing assembly screws
from the hardware bag halfway into hole of the upper switch housing, then the hardware bag, into place and
wrap keyhole slots around the screws and then tighten all three screws.
the motor housing. It does not matter
twist counterclockwise.
which two screw holes you choose.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing fixture falling.
12
M3552-01 • 05/14/14 • © Hunter Fan Company