Specifications; Accessories; Service Parts; Tool Protection & Care - Stanley HD01 User Manual

Hydraulic hammer drill

Table of Contents

Rotation Speed at 6 gpm ................................................................................................................................800 rpm

Blows per Minute at 6 gpm ........................................................................................................................4200 blows

Weight without Couplers .........................................................................................................................9.1 lbs/4.1 kg

Weight w/Hose Whips &Couplers .........................................................................................................10.2 lbs/4.6 kg

Length................................................................................................................................................... 14.1 in./36 cm

Height ..................................................................................................................................................... 5.6 in./14 cm

Pressure ...............................................................................................................................750-2000 psi/50-140 bar

Flow Range ................................................................................................................................... 3-9 gpm/11-34 lpm

Optimum Flow .................................................................................................................................... 6 gpm/22.8 lpm

Porting ...................................................................................................................................................-8 SAE O-ring

Connect Size and Type .........................................................................................................................-8 SAE O-ring

Collar Diameter.................................................................................................................................... 54 mm / 2.1 in.

Motor ...............................................................................................................................................................Integral

Tool Holder/Bit Type .....................................................................................................................................SDS Plus

Measured A-weighted sound power level, Lwa (ref. 1pW) in decibels

Uncertainty, Kwa, in decibels

Measured A-weighted sound pressure level, Lpa (ref. 20 µPa) at operator's position, in decibels

Uncertainty, Kpa, in decibels

Values determined according to noise test code given in ISO 15744, using the basic standard ISO

3744

NOTE:

The sum of a measured noise emission value and its associated uncertainty represents an

upper boundary of the range of values which is likely to occur in measurements.

Declared vibration emission value in accordance with EN 12096

Measured vibration emission value: a

Uncertainty: K

Values determined according to ISO 28927-10:2011

ACCESSORIES

DESCRIPTION

1/2-inch Friction Chuck with Adaptor .................................................................................................................72992

SERVICE PARTS

DESCRIPTION

Seal Kit ..............................................................................................................................................................72864

Service Kit (Includes items 6, and 59 thru 62 see illustration) ...........................................................................72661

SOUND POWER AND VIBRATION DECLARATION