Trouble Shooting - NetComm NP207 Quick Start Manual

TROUBLE SHOOTING

My Powerline adapters will not connect to each other
1.
Connect all adapters to powerpoints near each other in the same
room (or temporarily to a powerboard)
2.
Press and hold down the black button on one of the adapters for
15 seconds, or until the LED's flash. This will reset the password on
that device.
3.
Press and hold the black button on the other device for 2 seconds.
This will put the adapter in pairing mode. When the adapter is in
pairing mode, the
4.
Finally hold the black button on the first device for 2 seconds to
complete the pairing process. When pairing is complete, the
on both adapters will be lit. Both adapters now share the same
password and will be able to communicate with each other.
LED will flash.
200Mbps Powerline Adapters with AC Pass-through - NP207
LED