Selecting A Trolling Motor Type; Displaying Spotlightscan View - Lowrance HDS Gen2 Touch Operator's Manual

HDS Gen2 Touch
118 |

Selecting a trolling motor type

1.
Access the Network menu
2.
Select Device list
3.
Select the position sensor (SLS-100) from the device list
4.
Select Calibrate on the device information dialog
5.
Select your trolling motor type
6.
Select Calibrate
7.
Select OK on the confirmation dialog

Displaying SpotlightScan view

SpotlightScan images are viewed on the Structure page. You can set
up combo pages to view SpotlightScan images, broadband sonar
and DownScan images at the same time.