Basic Operation; The Power Key; First Time Startup; Using The Touchscreen - Lowrance HDS Gen2 Touch Operator's Manual

2
10 |

Basic operation

The power key

•
Press and hold:
•
Single press:
•
Repeated
presses:
¼ Note:
If the power key is released before shut-down is completed,
power off is cancelled.
Night mode
Optimizes the color palette for low light conditions.
¼ Note:
Details on the chart may be less visible when Night mode is
selected.
Standby mode
When in Standby mode, the sonar and the backlight for
touchscreen and keys are turned off to save power. The system will
continue to run in the background. Press the power key to switch
from Standby mode to normal operation.

First time startup

When you start up the unit for the first time, the configuration
dialog appears. Tap Close to manually configure settings.

Using the touchscreen

Basic touchscreen operation on the different pages is shown in the
table.
The Pages section later in this manual has more information about
page-specific touchscreen operation.
Basic Operation |
Turn unit on/off
Display dialog for
brightness adjustment,
night mode, standby
mode and power off
Toggle preset brightness
levels (10 - 6 - 3- 1)
Lowrance HDS Gen2 Touch