Fujitsu PRIMERGY BX920 S2 Operating Manual page 77

I
Timeout Value
Sets the boot watchdog timer of the operating system in minutes
(0 ... 100).
I
ASR&R Boot Delay
Specifies the ASR&R boot delay time in minutes (1 ... 2 ... 30).
Power Cycle Delay
Specifies the delay between Power Off and the following Power On in
seconds (0 ... 7 ... 15).
Temperature Monitoring
Specifies whether the system can still be started when reaching a critical
temperature (Enabled) or not (Disabled).
Boot Retry Counter
Specifies the number of boot attempts (0 ... 3 ... 7) after a failed boot
process.
CPU STATUS
Calls a submenu for specifying the CPU status (see
Memory Status
Calls a submenu for specifying the memory status (see
PCI Status
Calls a submenu for specifying the PCI status (see
Console Redirection
Calls a submenu for specifying additional settings for the console (see
page 75).
IPMI
Calls a submenu for specifying the IPMI configuration and the Event Log
(see page
BX920 S2
This item is only displayed if "O/S Boot Timeout" is set to
Enabled.
This item is only displayed if "O/S Boot Timeout" is set to
Enabled.
76).
Operating Manual
Server menu
page 74).
page 74).
page 75).
73