HP 650C User Manual page 29

Cutting Track
(C) C2847-15(UM)
10. When the front panel displays ªSheet load/Roll load,º press the
button to select ªRoll load.º
11. When the front panel displays ªSELECT MEDIA,º press the
button to scroll through and select the media choice. Press the
plotter for the media type being used. The plotter will now load the roll of media.
12. When indicated on the front panel, raise the pinchwheel lever to the up position.
13. When ªPull / Align
and right edges of the roll toward you until taut. Then align the left and right edges of
Trimming the Leading Edge of the Media
Figure 3-5.
Loading the Leading Edge of the Media
Figure 3-6.
edges to rollº is displayed on the front panel, pull the left
(C) C2847-7(UM)
Insert Media Until
it Buckles Evenly
Align Media with
Perforation Line
Up or Down Arrow
Enter button to set the
Installation and Configuration
Down Arrow
3-9