InFocus IN1146 User Manual page 24

u t m m
SIng he aIn
Refer to the below table for details on menu items.
Menu Menu item
Display Mode
Brightness
Contrast
Tint
Sharpness
Saturation
PICTURE
Advanced
Aspect Ratio
Overscan
SCREEN Digital Zoom
Auto Keystone
Manual Keystone
Language
Projector
Position
Menu Position
SETTING
Signal
Mute
Volume
Auto Search
Fan Mode
Background
Color
Information
OPTIONS
Advanced
enu
Set the brightness of the display.
Adjust the brightness of the image.
Adjust the contrast of the image.
Adjust the balance of the red, green, and blue colors of the image.
Adjust the sharpness or softness of the image.
Adjust the color intensity.
Set advanced settings for projected image.
Gamma Adjust the color gamma differences between the dark and bright portions of the input signal.
BrilliantColor Increase the brightness by changing the colors.
Color Temperature Select the color temperature in the display.
Color Space Adjust the color for projected image from a video input signal.
Exit Return to the PICTURE submenu.
Select the aspect ratio of the display.
Enable overscan display (only for HDMI input signal).
Digitally enlarge the projected image.
Automatically adjust the trapezoidal (keystone) distortion of the projected image.
Manually adjust the trapezoidal (keystone) distortion of the projected image.
Set the on-screen display language.
Select the projector position.
Set the display position of the OSD menu.
Adjust the PC display settings.
Auto Synchronize the display automatically.
Phase Adjust to reduce horizontal noise.
Clock Adjust to reduce vertical noise.
H Position Move the screen position horizontally.
V Position Move the screen position vertically.
Exit Return to the SETTING submenu.
Temporarily turn off the sound.
Adjust the volume of the built-in speaker.
Automatically detects the input signal when the projector is turned on.
Set the fan speed according to altitude.
Set the background screen color when there is no input signal.
Display the projector information.
Configure other general settings.
Direct Power On Turn on the projector power automatically when the power supply is switched on.
Auto Power Off Set the projector to automatically turn off if it is left idle at the preset time.
Reset All Settings Reset all settings to the factory default settings.
Exit Return to the OPTIONS submenu.
Description
24