Specifications; Troubleshooting - InFocus IN1146 User Manual

S
pecIfIcatIonS
Item
Model IN1146
Imager DMD WXGA 0.45"
Native
1280x800 WXGA
Resolution
Brightness 800 Lumens
Projection
0.9-2.4 m (2ft 11in to 7ft 10in)
Distance
Projection
20"-150" (0.5m to 3.81m)
Screen Size
Focus Manual
Throw Ratio 1.4
Vertical
±40°
Keystone
Projection Modes Table Top, Front Projection/Rear Projection
Standard Input
up to SXGA+ (60Hz)
Resolutions
SDTV/EDTV/
480i, 480p, 576i, 567p, 720p, 1080i
HDTV
NTSC/ NTSC4.43/ PAL (Including PAL-M,
Video Signal
PAL-N)/SECAM/ PAL60"
Horizontal
30.5 - 91.1kHz
Frequency
Vertical
50 - 85Hz
Frequency
Safety
CE, CB, FCC
Certifications
Operating
0 - 40°C
Temperature
Dimensions
175 x 44.5 x 138mm
(WxHxD)
Power Input AC adapter 100~240 V, 50Hz/60Hz
Power
Typical 85W@110Vac
Consumption
Standby <0.5W
Lamp LED
Lamp Life 20,000 Hours
Speakers 2Wx2
VGA (15 pin D-sub)
HDMI
Input Ports A/V In 3.5mm
USB
SD card
Security Kensington Slot
Regulatory Model: IN1146
Part Number: 4J.10801.001
Description
www.infocus.com/support
t
rouBLeShootIng
If you experience a problem with your projector, please refer to the following
information. If a problem persists, please contact your local retailer or service
center.
Image Problems
P No image appears on-screen
• Ensure the power cord is correctly and securely connected.
• Ensure the pins of connectors are not crooked or broken.
• Make sure the projector is switched on.
P Image is out of focus
• Adjust the Focus Dial.
• Make sure the projection screen is between the required distance 0.9 to
2.4 meters (2ft 11in to 7ft 10in) from the projector. See page 5.
P Image is too small or too large
• Move the projector closer to or further from the screen.
Audio Problems
No sound
P
• During music playback, press
control panel.
Note
When the projector temperature reaches 85°C, the projector automatically shuts down due to
the built-in temperature protection. This is not a malfunction. Let the projector cool down before
switching it on again.
/ on the remote control or / on the
t u