Toshiba PSL3 User Manual page 154

Display Controller and Modes
■
The way to move to multi-monitor (ATI RADEON XPRESS 200M)
■
■
■
■
2. In some cases DVD video playback images may not be displayed when
the display of the computer and a CRT display are used at the same.
Reduce the resolution, use the display of the computer only, use the
CRT display only or set display device in the multi-monitor, then play
DVD.
■
3. The DVD video overlay is not displayed when the display mode of CRT
display is set to high resolution and high refresh rate mode.
Please decrease the resolution and refresh rate of CRT display.
4. When the display mode is simultaneous LCD (internal liquid crystal
display) and the system goes into Standby or Hibernation Mode, you
can switch to the LCD (internal liquid crystal display) display mode by
pressing Fn + F5. Under this environment, however, you may not return
to the simultaneous LCD (internal liquid crystal display) display mode.
In these cases, perform the following steps:
In Advanced feature of Display Properties. Select the Display tab,
click the icon indicating a display device (display mode) you want to
use.
B-8
Switch to Display Properties, like shown in previous page.
Click Advanced in Display Properties.
Select Displays tab in (Multiple Monitors) and ATI RADEON
XPRESS 200M Series Properties.
With external monitor connected, click on the
Monitor, then select OK.
Display Properties
Please refer to External monitor
the application guide for the setting of each display device.
button beside
(Multiple Monitors) and ATI RADEON
XPRESS 200M Series Properties
in Chapter 8, Optional Devices, or
User's Manual