User Password; Boot Priority - Toshiba PSL3 User Manual

Satellite l30 / satellite pro l30 series
Table of Contents

Advertisement

HW Setup (Depends on the model you purchased)
Password
This tab allows you to set or reset the user password for power on.

User Password

Lets you register a new password or un-register an existing password.
Not Registered
Registered
Owner String
This blank field is used to display a message when the password field is
displayed on startup. If a password is not registered the message will not
be shown. The maximum length is 256 characters.
Display
This tab lets you customize your computer's display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you select the display to be used when the computer is booted (This
setting is only available on Standard VGA mode and not available on
Windows
Auto-Selected
LCD + Analog RGB

Boot Priority

Boot Priority Options
This option sets the priority for booting the computer.
To select the boot drive you want, follow the steps below.
1. Boot-up your computer and press F12 to enter the boot menu.
2. The boot select screen will be displayed: Hard disk Drive, CD/DVD,
FDD and LAN.
3. Use the upper/lower cursor keys to highlight the boot device you want
and apply.
7-2
Un-registers an existing password
Register a new password by following the on
screen instructions
®
Desktop).
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD (Default).
Selects both the internal LCD and external
monitor for simultaneous display.
User's Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Satellite l30 seriesSatellite pro l30 series

Table of Contents