Technical Data - Husqvarna FS 413 Operator's Manual

MODEL
-----
FS 
The Honda engine on this equipment has been tested for EMC using the methods outlined in EN 98:98. The tests
found that the engine did not exceed the radiated emission limits. This test report is on file at Husqvarna Construction
Products, Olathe, Kansas, USA. Because the engine is the source for a vast majority of Electromagnetic activity of
this machine, Husqvarna Construction Products declares the entire machine to be Electromagnetically Compatible.
This tool does not exceed the exposure action value of 2.5 m/s
This equipment has been tested for HAV in accordance with ISO 9. The results are shown in the following chart.
Model
FS
The Aeq value is the measured continuous vibration at the extended handlebars expressed as acceleration with the
units of m/s (meters per second squared). The measured values were taken with a fully warmed engine, running

at maximum rated RPM and a 00-mm blade. The measurement point was the grip of the extended handlebars.
Instrumentation was a Larson Davis model HVM00 Human Vibration Meter and the SEN0 Triaxial Accelerometer.
The accelerometer was secured to a hand adapter, which allows it to sense the same magnitude of vibration as the
operator's hand.
The Maximum Exposure Time is a calculated value referenced to an 8-hour workday and the "daily exposure action
value" of . m/s as defined in Directive 2002/44/EC of 25 June 2002.

The time weighted daily vibration exposure time can be found with the following formula:
Over exposure to vibrations can result in blood vessel or nerve injury to persons suffering with blood circulation problems.
Seek medical attention if you experience physical symptoms that can be related to over exposure to vibrations. Examples
of symptoms are numbness, lack of feeling, tingling, tickling, pain or a reduction of normal strength, or changes in skin
color. These symptoms normally appear in the fingers, hand or wrists.

TECHNICAL DATA

Technical Data - Sound Level, EMC, and HAV
(ElectroMagnetic Compatibility)
Maximum Vibration (Aeq) in m/s
Maximum Exposure Time = (./Aeq)
Sound Level
POWER LEVEL
Lwa (dB)
EN 
0.
-
EMC
HAV
(Hand-Arm Vibration)
.
PRESSURE LEVEL
Lpa (dB)
EN ISO 0
Maximum Exposure Time
2
+00%
X 8 hours

8.
-
.
2