Advertisement
RANGE CONTROL PANEL
Electronic
Clock
Styling may differ depending on the model yon selected.
The electronic clock and timer on your Maytag range
Setting
the Clock and Timer
will flash 12:00 when power is first supplied to the range
or if there is a power f;ai]ure.
Clock
The following pads are found on yonr Ma_ag electronic
To set the time-of-day
clock:
clock:
1. Press the CLOCK pad.
Clock
Pad
2. Press and hold the HOUR pad to set the correct
This pad is used to set the time of day and it cancels the
hours. To change the time by a single horn; give the
timer operation,
pad a short tap.
3. Press and hold the MINUTE pad to set the correct
Timer
Pad
minntes. To change the time by a single minute, give
The timer call be set from 1 minute to I hour and 59
tile pad a short tap.
milmtes (or two hours). It will count down by minutes.
For example: to set the eloek for 3:15, press and hold
Hour
Pad
the HOUR pad until 3 appears ill tile hours display.
Then press and hold the MINUTE
pad until 15
This pad is used to set the hour for the clock or timer,
appears in the minutes display.
Minute
Pad
This pad is used to set the minutes for the clock and
tilner.
PAGE 4
Advertisement
