Advertisement
RANGE CONTROL PANEL
Electronic
Clock
Styling m W differ depending on the model you selected.
The electronic clock and timer on your Ma_ag range
Setting
the Clock and Timer
will flash 12:00 when power is first supplied to the range
or if there is a power failure.
Clock
The following pads are found on your Maytag electronic
To set the tlme-of-day
clock:
clock:
1. Press the CLOCK pad.
Clock
Pad
2. Press and hold the HOUR pad to set tile correct
This pad is used to set the time of day and it cancels the
hours. To ehange the time by a single hour, give the
timer operation,
pad a short tap.
3. Press and hold the MINUTE pad to set the correct
Timer
Pad
minutes. To change the time by a single minute, give
The timer can be set from 1 minute to i hour mad .59
the pad a short tap.
minutes (or two hours). It will count do'am by minutes.
For example: to set the clock for 3:1,5, press and hold
Hour Pad
the HOUR pad until 3 appears in the hours displa3a
Then press and hold the MINUTE
pad until 15
This pad is used to set the hour for the clock or timer,
appears in the minutes display,
Minute
Pad
This pad is used to set the minutes tot the clock and
timer.
PAGE 4
Advertisement
