Lenovo 10AU User Manual page 58

This section provides instructions on how to install or replace the optical drive.
Note: The optical drive is only available in some models.
To replace an optical drive, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See "Removing the computer cover" on page 35.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 36.
4. Pivot the drive bay assembly upward. See "Accessing the system board components and drives"
on page 37
5. Disconnect the signal cable and the power cable from the optical drive.
6. Hold the optical drive and remove the two screws that secure the optical drive.
Figure 24. Removing the optical drive
46
ThinkCentre E73 User Guide